Trying Out Predictions

For this code, I removed the extra "move 10 steps" block from the inner repeat block and I changed the outer repeat block to 7. This made the diameter of my circles smaller, but it didn't come together to create a full circle. If I wanted my design to look like a complete circle, I would change the "repeat 7" to "repeat 28" or a number greater than 7, which means that there would be a greater rotation of circles to form a design similar to the original design:
I thought about changing the "move 10 steps" variable to 20, but I soon realized it changed the length of the jumps within the stitches. In my next trial, I adjusted the "turn clockwise 90 degrees block" to 180 degrees and the repeat to 11. I noticed how the turtle/arrow moved differently compared to my other trials. In the other trials, the circles were created next to each other, but for this code with 180 degrees, the circles were created across from each other.
90 degrees
180 degrees











I added comments to the original code and I stated how each block contributed to the design as a whole. Here is the link to the code: http://turtlestitch.org/run/index.html#open:../media/uploads/1478259045070.xml 
A question I still have for you all to help me answer is: how would you use small squares to form a circle? Next week, I am planning on stitching the codes and examining the motion of the digital embroiderer to see how my code affects each part of my different designs.

Comments

  1. andmastaNovember 6, 2016 at 2:11 PM

    It was great to find the Url to the original project, so that i was able to execute the code myself. Thanks for commenting the single lines of code. It gives an useful insight in the logic of the code!

    ReplyDelete

Post a Comment

Popular posts from this blog

What is Your Zodiac Sign?

Image
This year's Turtlestitch theme is identity. What culture or pattern represent you? What are the letters of your name? What are your favorite colors? This week I am focusing on astrological signs, also known as horoscopes, which are determined by birth dates. I decided to embroider these signs because recently, I started to believe that it represents my personality pretty well. I am a Leo-Virgo cusp, and after reading the cusp is defined as "one of leadership and communication but also one of independence and secrecy," I was convinced I am a mix of the two signs. What is your horoscope? Embroider your sign! Aries (March 21 - April 19) Taurus (April 20 - May 20) Gemini (May 21 - June 20) Cancer (June 21- July 22) Leo (July 23 - August 22) Virgo (August 23 - September 22) Libra (September 23 - October 22) Scorpio (October 23 - November 21) Sagittarius (November 22 - December 21) Capricorn (December 22 - January 19) Aquarius (January 20 - February 18) Pisc...
Read more

Resizing and Adjusting a Pattern

Image
When I was playing around with the different features on the Brother PE-770 embroidery machine, I learned it is possible to resize and adjust a pattern. Here are some things I found out: The pattern would have to fit the frame in order to be opened or altered There is a limit to how much a pattern can be resized Using the LAYOUT features can help determine where the pattern will go on the fabric Check out my slideshow below to learn how to resize and adjust a pattern, and feel free to ask me any questions! More sophisticated and creative patterns can be made by overlapping or duplicating the design with the features. It can also help with easier visualization of the size and location on the fabric. I can't wait to share future designs with these features, and I hope similar features can be found on different embroidery machines!      
Read more

Cracking Down a Code #1

Image
Today, I am looking and extracting a code on TurtleStitch so I could get a better understanding of what each block does to create a certain design. Original code I will go in order from top to bottom and explain the blocks: Figure 1 (max_stepsize=40) when (flag) clicked : this block is used to control the script so when you click on the green flag, the turtle will start stitching the code. go to x: 0 y: 0 : this block is used to direct the turtle to the center of the stage. set __ to __ : this block is used to set the chosen variable to a given value (string or number).       a)  max_stepsize is the spacing between the stitches so if it was set to 10, then it would look like the above image. If I changed it to 40, it would look like Figure 1.       b)  len  seems to be the size of the center of the design. When I set it to 50, I realized the center got bigger and when I set it to 100, there was an even greater difference...
Read more

Connecting TurtleArt with TurtleStitch

Image
This week, I studied variables and applied it to TurtleArt. I was able to look at a basic code from TurtleArt and from their code, I learned how to create a variable and define it. I wanted to create a box that was repeated while overlapping. I started by making my own block: From the "box" block, I wanted the distance to increase each time it is repeated, so I turned made distance a variable. This was how my new code looked like (below); it was a success! I was even able to alter it and make it rotate: This made me wonder, like the petal code (from previous blog post), how would I make the stitches smaller, while keeping the distance the same? Please comment suggestions. Thank you!
Read more

Stitch Warnings!

Image
When I was helping students the other day, a few students asked me what the certain warnings mean on Turtlestitch. The first warning a student came across was "DENSITY WARNING!" and the other warning another student received was "1 is too long! (will get clamped)." Today I will go over both of these warnings based on our observations! I hope you will find this helpful when coding. "DENSITY WARNING!" This is the link to Aaron's code: http://www.turtlestitch.org/run#cloud:Username=aaronkong&ProjectName=drawng%20GGG    This is what we found out: -the warning appears when multiple stitches overlap each other repeatedly. -the stitches become too thick. -the needle may break! The center of the design is darker than the rest of the code, and when the turtle is moving, the stitches are repeated in the same area. This makes the center dense/thick and may cause the needle to break when passing through the stitches. "1 is...
Read more